We can provide optimal solutions for highrise and mass timber buildings.
Structural design for high-rise timber buildings
Structural analysis of high-rise timber buildings
Connection design and engineering for timber construction
Maintenance of timber buildings and structural analysis of traditional Korean timber architecture.
We are looking for partners (architects, structural engineers, and timber manufacturer) for highrise timber construction in the world.
We have Ph.D or MS positions for the future graduate student in timber engineering area whose background in the field of civil engineering, computer science, architectural engineering, architecture, wood science, and other engineering areas)
The forum "Tall Trees Against Fine Dust" was held on June 23, 2020, at the Seminar Room on the 1st floor of the G&R Hub, Chonnam National University.
Dr. Jeong will present a topic on "Fighting climate change with tall buildings" in Council on tall buildings and urban habitat (CTBUH 2018) at Dubai from 2018. Oct. 20-25)
June 1, 2018 — Forum: Modernization of Timber Building Design and Revitalization of the Industry
Seminar Room, 1F, G&R Hub, Chonnam National University, Gwangju, Korea
Create the tall timber building by breaking the limit.
Our Story
Every decision we make is shaped by a clear sense of purpose. Our journey has been anything but ordinary. Through every step, we've focused on staying true to our values and making space for thoughtful, lasting work.
What began as a passion project has evolved into something more. We’re proud of where we’ve been and even more excited for what’s ahead.
안녕하십니까
목조건축 연구소 방문을 환영합니다.
본 연구소는 목조건축산업 활성화를 위한 기술지원을 목표로 2017 년 설립되었습니다.
목구조 연구개발과 관련된 각종 R&D 사업 및 산학협력사업에 효과적으로 대응하기 위한 전략을 수립하고 이에 필요한 기술개발 및 전문인력 양성을 하고 있습니다.
저탄소 저에너지를 선도하는 목조건축을 대형, 고층, 주거, 상업, 학교 및 스마트 도시 건설을 실현과 인재양성, 기술개발, 산업의 활성화에 선도적인 역할을 하겠습니다.
위의 비젼 아래 다음과 같은 역할을 수행하고자 합니다.
고층 목조건축 구조해석 기술 제공
목조접합부 설계 및 실험, 기술 제공
국가 대형 R&D 사업단 추진을 위한 연구, 행정지원
전통 목조건축 문화재 안전진단을 위한 기술 제공
목조건축 연구소가 대한민국 고층, 대형 목조건축 실현을 위한 기술제공 및 전통목조건축 유지관리 기술을 선도 하겠습니다.
많은 관심과 참여를 부탁드립니다.
목조건축 연구소
정기영 교수
Timber engineers
Jeong, Gi Young, Ph. D. Professor
Chonnam National University
Seismic design
Highrise timber construction
Connection design
AI based optimization for building design
▶ 연구소 현황
◎ 목조건축 연구소
◎ 참여기관 : 전남대학교, (주)ids건축사사무소
◎ 주요사업내용 : 연구 (대형 목조건축 기술개발, 중고층 목조건축물 구조설계)
교육 (목구조 구조설계 기술교육, 안전진단교육, 목구조 건축자재)
사업 (대형 목조건축 구조설계, 접합부 설계, 전통 목조건축물 안전진단, 기술지원)
▶ 찾아오는 길
▶ 주소 : 광주광역시 북구 용봉로 77 전남대학교 농업생명과학대학 3호관 210호
▶ 우편번호 : 61186
▶ 전화번호 : 062)530-4876
◎ 추진목표
고층 목조건축 구조설계 기술 제공
전통목조건축 구조해석 및 안전진단 기술 제공
목조건축 국가 대형 R&D 사업에 참여 및 기술개발
구조해석 및 구조용 재료 물성 측정 위한 목재과학기술 제공
◎ 활동계획
목재과학기술 통합 지원 시스템
- 대형 목조건축물 구조 안정성 검토
- 목구조 건축물 설계 기술 지원
- 목재문화재 안전진단, 유지관리 지원
국가 대형 R&D 사업단 추진
- 대형, 고층 목구조 설계 매뉴얼 개발
- 목구조의 구조안정성 확보를 위한 기술 개발
- 전통목조건축의 현대화 산업화를 위한 기술 개발
— Former Client
- Referred Journal Articles
Tran, D. k., Jeong G. Y. (2025) Experimental Investigation and Design Equations for Steel Strap Connections in CLT Construction. Journal of Materials in Civil Engineering. (accepted)
Jeong G.Y., Pham V. S., Tran D. K.(2025) Prediction of shear properties in cross laminated timber–concrete composites with notch connections. Structures. 76:108949
Jeong G.Y. (2024) Status of CLT building construction from 2004 to 2023. Construction and Building Materials 449, 138496
Jeong G. Y., Pham V. S., Tran D. K. (2023) Development of predicting equations for slip modulus and shear capacity of CLT–concrete composite with screw connections. Journal of Building Engineering 106468
Tran, D. K., Jeong G. Y. (2023) Tension resistance properties of hold-down and angle-bracket connections on cross laminated timber (CLT). Structures 56:104841
Tran, D. K., Jeong G. Y. (2023) Design of geometric variables of hold-down and angle bracket connections for lateral resistance enhancement of cross-laminated timber (CLT) walls considering the influence of wood species, lod-grain angles, and floor conditions. Structures 48:1003-1017
Tran, D. K, Jeong G. Y. (2022) Withdrawal capacity and strength of self-tapping screws on cross-laminated timber. Structures. 37:772-786
Tran, D. K, Jeong G. Y. (2021) Nonlinear and elasto-plastic behaviors of cross-laminated timber (CLT) walls under lateral loads. Construction and Building Materials. 295
Tran, D. K, Jeong G. Y. (2021) Effects of wood species, connection system, and wall-support interface type on cyclic behaviors of cross-laminated timber (CLT) walls under lateral loads. Construction and Building Materials. 280(9):122450
Jeong G. Y. (2021) Tensile Properties of Utgulisanji Connection. International Journal of Architectural Heritage. 15(2):313-320
Jeong, G. Y., T. N. Nguyen, D. K. Tran, T. B. H. Hoang (2020) Applying unmanned aerial vehicle photogrammetry for measuring dimension of structural elements in traditional timber building. Measurement. 153. 107386:1-13.
Pang, S. J. Jeong, G. Y. (2020) Swelling and shrinkage behavior of cross lamited timber made of different species with various lamina thickness and combinations. CONSTRUCTION AND BUILDING MATERIALS. 240:117924:1-15.
Lee. S. S., Pang. S. J., Jeong G. Y. (2019) EFFECTS OF SIZE, SPECIES, AND ADJACENT LAMINA ON MOISTURE RELATED STRAIN IN GLULAM. WOOD AND FIBER SCIENCE. 51(2):101-118.
Pang, S. J. Jeong, G. Y. (2019) Effects of combinations of lamina grade and thickness, and span-to-depth ratios on bending properties of cross-laminated timber (CLT) floor. CONSTRUCTION AND BUILDING MATERIALS. 222(20):142-151 .
Pang, S. J. Jeong, G. Y. (2019) Effects of Density, Temperature, Size, Grain Angle of Wood Materials on Nondestructive Moisture Meters. 목재공학회지 47(1):40-50.
Jeong, G. Y., J.H. Kong, S. S. Lee. (2018). Determination of moment carrying capacity of sagae connection using different methods. Engineering Structures. 159:46 - 54.
Pang, S.J., Jeong, G. Y.,. (2018). Load sharing and weakest lamina effects on the compressive resistance of cross-laminated timber under in-plane loading. Journal of Wood Science. 64(5)
Jeong, G. Y. , J. H. Kong, S. J. Lee, S. J. Pang. (2018). Comparisons of bearing properties for various oriented glulam using digital image correlation. Journal of Wood Science. 64(3):237 - 245.
Lee, S. S., Jeong, G. Y. (2018). Effects of sample size on swelling and shrinkage of Larix kaempferi and Crytomeria japonica as determined by digital caliper, image analysis, and digital image correlation (DIC). Holzforschung. 72(6):477 - 488.
Jeong, G. Y, J.H. Kong. (2018).EVALUATE BEARING PROPERTY OF WOOD PEG CONNECTION. Wood and Fiber Science. 50(1):20 - 32.
Jeong, G. Y., J. K. Song. (2017). Evaluation of structural properties of dovetail connections under tensile load using three methods of data analysis. Journal of Materials in Civil Engineering 29:10
Pang, S. J., B.J. Lee, Jeong, G. Y. (2017).Insulation saving effect for Korean Apartment House Using Cross Laminated Timber (CLT). J. Korean Wood Science and Technology. 45(6):846 - 856
Jeong, G. Y., M. J. Park. (2016). Evaluate orthotropic of wood using digital image correlation. Construction and Building Materials. 113:864-869
Jeong, G. Y. (2016). Effects of forest management on mechanical properties of oriented strand board. Forest Products Journal. 66(5/6):371-377
Lee, S. S., W. T. So, G. Y. Jeong. (2015). Review on The Measurement of Wood Shrinkage. Journal of Korean wood science and technology. 43(6):746-756
Jeong, G. Y., J. H. Kong, J. K. Song. (2015). Review of lateral resisting and moment carrying capacity studies for wood to wood connections. Journal of the Korean architectural institute of Korea, Structure & Construction. 31(5):13-24
Jeong, G. Y., J. H. Kong. (2015). Effects of span-to-depth ratio and Poisson’s ratio on elastic constants from bending and plate tests. Journal of Korean wood science and technology. 43(2):177-185
Kong, J. H., G. Y. Jeong. (2015). Review of visual grading and allowable stress determination methodologies for domestic softwood. Journal of Korean wood science and technology. 43(1):25-35
Jeong, G.Y., M. J. Park, J. S. Park, and S. J. Lee. (2013). Predicting moment carrying capacity of the “sagae” connection using the finite element method. Journal of Korean wood science and technology. 41(5):415-424.
Jeong, G. Y., J. J. Lee, H. Y. Yeo, J. P. Hong, H. K. Kim, W. T. So, and W. Y. Chung. (2013). Optimized lamina size maximizing yield for cross laminated timber using domestic trees. Journal of Korean wood science and technology. 41(2):141-148.
Kim, H. K., J. K. Oh, G. Y. Jeong, H. Y. Yeo, and J. J. Lee. (2013). Shear performance of PUR adhesive in cross laminating of red pine. Journal of Korean Wood Science and Technology. 41(2):158-163.
Amateis, R. L., H. E. Burkhart, and G. Y. Jeong. (2013). Modulus of elasticity declines with decreasing planting density for loblolly pine (Pinus taeda) plantations. Annals of Forest Science. 70:743-750
Jeong, G. Y. (2013). Relationship between anatomical and mechanical properties of loblolly pine (Pinus taeda). Forest Products Journal. 63(1/2):47-53.
Jeong, G. Y. and A. Zink-Sharp. (2013). Anatomical variability within a loblolly pine tree under thinning management. Wood and Fiber Science 45(1):119-122
Jeong, G. Y., M. J. Park, J. S. Park, K. H, Hwang. (2012). Predicting load carrying capacity of dovetail connection using the stochastic finite element method. Wood and Fiber Science 44(4):430-439
Chun, S. J. S. Y. Lee, G. Y. Jeong, J. H. Kim. (2012). Fabrication of hydrophobic self-assembled monolayers (SAM) on the surface of ultra-strength nanocellulose films. Journal of Industrial and Engineering Chemistry. 18(3):1122-1127
Jeong, G. Y. and A. Zink-Sharp. (2012). Impact of fertilization on within-tree variability in young loblolly pine (Pinus taeda). Wood and Fiber Science 44(3):334-337
Suh, J. S, S. W. Hwang, K. H. Hwang, G. Y. Jeong, H. H. Joung. (2012). Shear strength of nailed connection of domestic plywood as a substitute for OSB. Journal of the Korean Wood Science and Technology. 40(4):287-293
Pang, S. J., J. S. Park, K.H. Hwang, G.Y. Jeong, J. S. Park, M. J. Park, J. J. Lee. (2011). Bending strength of Korean softwood species for 120 × 180 mm structural members. Journal of the Korean Wood Science and Technology. 39(5):444-450
Jeong, G. Y., D. P. Hindman, and A. Zink-Sharp. (2010). Orthotropic properties of loblolly pine (Pinus taeda) strands. DOI 10.1007/s10853-010-4658-2, Journal of Materials Science 45(21):5820-5830
Jeong, G. Y., A. Zink-Sharp, and D. P. Hindman. (2010). Applying digital image correlation to wood strands: influence of loading rate and specimen thickness. Holzforschung 64(6):729-734
Jeong, G. Y. and D. P. Hindman. (2010). Modeling differently oriented loblolly pine strands incorporating variation of intraring properties using a stochastic finite element method. Wood and Fiber Science 42(1):51-61
Jeong, G. Y. and D. P. Hindman. (2009). Ultimate tensile strength of loblolly pine strands using stochastic finite element method. Journal of Materials Science 44(14):3824-3832
Jeong, G. Y., A. Zink-Sharp, and D. P. Hindman. (2009). Tensile properties of earlywood and latewood from loblolly pine (Pinus taeda) using digital image correlation. Wood and Fiber Science 41(1):51-63
Jeong, G. Y. and D. P. Hindman. (2008). Elastic constants evaluated from plate tests compared to previous bending tests. Forest Products Journal 58(9):53-58
Jeong, G. Y., D. P. Hindman, D. Finkenbinder, J. N. Lee, and Z. Lin. (2008). Effect of loading rate and thickness on the tensile properties of wood strands. Forest Products Journal 58(10):33-37
AWARDS
2014. Kong. J. H., Jeong G. Y. “Effects of Peg Diameters and Orientations on the Bearing Properties of Wood Peg Connection. Excellent presentation award from Architectural Institute of Korea
2015. Lee, S. S., Jeong G. Y. “The effects of species and size on the tensile properties of utgulisanji connection using FEM " Excellent presentation award from Architectural Institute of Korea
2016. Lee, S. S., Jeong G. Y. “Effect of moisture content on moment carrying capacity of sagae connection” WISET Young Researcher award from Architectural Institute of Korea
2017. Lee, S. S., Jeong G. Y. "함수율 변화에 따른 엇갈이산지이음의 내력성능 분석" Excellent M.S thesis award from Architectural Institute of Korea
2019. Tran, D. K., Jeong G. Y. "Non-linear behavior of cross laminated timber wall under lateral loading". Excellent presentation award from Architectural Institute of Korea
2020. Lee. S. S. Pang. S. J. Jeong, G Y. EFFECTS OF SIZE, SPECIES, AND ADJACENT LAMINA ON MOISTURE RELATED STRAIN IN GLULAM. WOOD AND FIBER SCIENCE. 51(2):101-118. George G. Marra Award of Excellence. Second place.
-Alumni
박은우 (2022-2023). 현. 삼성전자
팜반시 (2019-2021). 현. laval university 토목공학과 박사과정
트란당카이 (2018-2021). 현. Vietnam National University, Ho Chi Minh City University of Technology (HCMUT) 토목공학과 조교수
김영우 (2020-2021). 현. 포스코
김지용 (2017-2021). 현. 파워21 연구소
이윤성 (2020-2021). 현. 지멘스
노상현 (2019-2020). 현. 삼성전자
방성준 (2017-2018). 현. 전남대학교 부교수
공건웅 (2017-2018). 현. 엘지전자
Conference Presentations/Proceedings
Jeong. G. Y., Pham. V. S., Tran. D. K. (2021) Slip modulus and shear strength of notch connection in timber-concrete composite floor. 2021
콘크리트학회 가을 학술대회. 2021 November 3-5.
Jeong. G. Y., Tran. D. K. (2021) Effects of flexible and rigid diaphragm on lateral force distributions in hybrid concrete-timber buildings. 2021
콘크리트학회 가을 학술대회. 2021 November 3-5.
Jeong. G. Y., Tran. D. K. (2021) Seismic responses of three different archetypes of multi-story CLT buildings using concrete core. Autumn Annual Conference of Architectural Institute of Korea. (대한건축학회) 2021 October 28-30.
Jeong. G. Y., Pham. V. S., Tran. D. K. (2021) Shear behavior of timber-concrete composite floor. Autumn Annual Conference of Architectural Institute of Korea. (대한건축학회) 2021 October 28-30.
Jeong. G. Y. (2021) 3 차원 영상 모델을 이용한 목조건축 구조 안전성 분석. 2021 Spring Annual Conference of Architectural Institute of Korea
(대한건축학회) 2021 April 21-23.
Tran. D. K and Jeong. G. Y. 2020. Effects of core material on seismic responses of multi-story cross laminated timber (CLT) buildings. Autumn Annual Conference of Architectural Institute of Korea (대한건축학회) 2020 October 26-30.
Jeong. G. Y. 2020 Structural behaviors of traditional timber buildings in South Korea. Autumn Annual Conference of Architectural Institute of Korea (대한건축학회) 2020 October 26-30.
Pham. V. S. Jeong. G. Y. 2020 Slip modulus and shear strength of different timber-concrete hybrid floor connections. Autumn Annual Conference of Architectural Institute of Korea (대한건축학회) 2020 October 26-30.
Jeong. G. Y, Hoang. T. H., Tran. D. K. 2020. Categorization of Traditional Timber Buildings for Stability Check. Summer Annual Conference of Korea Institute for Structural Maintenance and Inspection 2020. 7.6. - 7.8.
Jeong. G. Y. 2020 Dynamic properties of traditional timber buildings SWST 63rd International Society of Wood Science and Technology 2020.7.12-7.15
Jeong.G.Y. 2019 구조용 집성판을 활용한 고층 목조건축물 내진 구조설계2019. Proceedings of the AIK meeting. 충남대학교(대전 유성구 소재), Korea. October 24-25.
Jeong.G.Y. 2019 고층 목조건축 벽식구조 내진 설계2019. Proceedings of the AIK meeting. (대한건축학회) 충남대학교(대전 유성구 소재), Korea. October 24-25.
Jeong. G. Y. 2019. High-rise timber building using Force based design. 5th Pacific Timber Engineering. Conference (PTEC 2019). Brisbane, AUSTRALIA. July 2019
Tran Dang. Khai., Nguyen. Tan No., Jeong.G.Y. 2019. 수평하중에 대한 구조용 집성판 벽 거동 예측 모델. 2019. Proceedings of the AIK meeting. 충남대학교(대전 유성구 소재),(대한건축학회) Korea. October 24-25.
Tran Dang. Khai., Nguyen. Tan No., Jeong.G.Y. 2019. Withdrawal strength of self-tapping screws on cross laminated timber. 2019. The 69th annual meeting of the Japan wood research society. Hakodate Arena, Hakodate, Japan.
Tran Dang. Khai., Jeong.G.Y. 2019. 국산 구조용 집성판에 사용된 스크류 뽑기 저항능력. 2019. Proceedings of the AIK meeting. (대한건축학회) 고려대학교 하나스퀘어 외(서울 성북구 소재), Korea. April 26-27.
Tran Dang. Khai., Nguyen. Tan No., Jeong.G.Y. 2019. 중, 고층 목조건축 내진설계시 콘크리트 혹은 구조용집성판 코어의 영향. 2019. 한국지진공학회 Workshop 및 학술발표회. 제주대학교 아라컨벤션홀, Korea. September 19-20.
Jeong.G.Y. Tran Dang. Khai. 2019. 고층 목조건축 다이어프램 설계. 2019. 한국지진공학회 Workshop 및 학술발표회. 제주대학교 아라컨벤션홀, Korea. September 19-20
Tan No Nguyen, Dang Khai Tran, and Gi Young Jeong. 2019. 드론과 건축물 수직거리에 따른 구조물 사진측량 결과 영향 조사. 2019. Proceeding of the AIK meeting. 고려대학교 하나스퀘어 외(서울 성북구 소재), Korea. April 26-27.
Tan No Nguyen, Dang Khai Tran, and Gi Young Jeong. 2019. 목조 건축물 진동 특성 평가. 2019. 한국지진공학회 Workshop 및 학술발표회. 제주대학교 아라컨벤션홀, Korea. September 19-20.
Tan No Nguyen, Dang Khai Tran, and Gi Young Jeong. 2019. 전통목조 건축물 유지관리를 위한 3차원 영상분석. 2019. Proceedings of the AIK meeting. (대한건축학회) 충남대학교(대전 유성구 소재), Korea. October 24-25.
Tan No Nguyen, Dang Khai Tran, and Gi Young Jeong. 2019. A new approach for 3D virtural model of traditional timber buildings. 2019. 5th International Conference on Structural Health Assessment of Timber Structures. Guimarães, Portugal.
Tan No Nguyen, Dang Khai Tran, and Gi Young Jeong. 2019. Applying a photogrammetry technique for the measurement of structural member in a traditional timber building. 2019. The 69th annual meeting of the Japan wood research society. Hakodate Arena, Hakodate, Japan.
Jeong.G.Y. 2018. Fighting climate change with tall timber. 2018. CTBUH(Council on Tall Buildings and Urban Habitat) 2018 conference.
국제 초고층학회 JW Marriott Marquis Hotel, Dubai. October 20-25.
Jeong.G.Y., Tran Dang. Khai., Pang.S.J. 2018. 국산 구조용 집성판 접합부 설계. 2018. Proceedings of the AIK meeting. (대한건축학회) 평창알펜시아리조트 컨벤션센터, 평창, Korea. October 25-27.
Jeong.G.Y., Tran Dang. Khai. 2018. 고층 목조건축물 내진 성능 설계. 2018. Proceedings of the AIK meeting. 평창알펜시아리조트 컨벤션센터, 평창, Korea. October 25-27.
Tran Dang. Khai., Pang.S.J, Jeong.G.Y. 2018. 반복하중에 대한 구조용집성판 전단벽 수평저항성능. 2018. Proceedings of the AIK meeting.
(대한건축학회) 평창알펜시아리조트 컨벤션센터, 평창, Korea. October 25-27.
Pang.S.J, Tran Dang. Khai., Nguyen, Tan No, Jeong.G.Y. 2018. 면외하중에 대한 국산 구조용집성판 휨·전단 저항성능 예측. 2018. Proceedings of the AIK meeting. (대한건축학회) 평창알펜시아리조트 컨벤션센터, 평창, Korea. October 25-27.
Jeong.G.Y., Pang.S.J. 2018. Effects of Species, Lamina Thickness and Combination on Moisture-Related Strain in Cross-Laminated Timber. 2018. Proceedings of the 2018 World Conference on Timber Engineering, 국제 목구조학회 Seoul, Korea. August.
Jeong.G.Y. 2018. 구조용집성판을 활용한 고층건물설계. 2018. 세미나 주제:목조건축 설계 현대화 및 사업의 활성화, Gwangju, Korea. June 1.
Jeong.G.Y. 2018. Connection design for cross laminated timber-concrete hybrid structure building. 2018. Proceedings of the Concrete engineering society meeting. 73-73. Changwon Exhibition Convention Center, Changwon, Korea. May 2-4.
Tran Dang. Khai., Pang.S.J., G.Y.Jeong. 2018. Structural design for connections in high-rise CLT buildings. 2018. Proceeding of architectural institute of Korea annual spring meeting. (대한건축학회) Seoul The-K Hotel, Korea. April 25-28.
Jeong.G.Y., Pang.S.J. 2018.Evaluate lateral resistance of different connections for high rise timber frame buildings. 2018. Proceedings of the Korean society of wood science and technology annual meeting. 9-9. Gyeongnam National University, Jinju, Korea. April 13-14.
Jeong.G.Y. 2018. Measurement of moisture content for stability of timber frame building. 2018. Proceedings of the Korean society of wood science and technology annual meeting. 66-66. Gyeongnam National University, Jinju, Korea. April 13-14.
Jeong.G.Y. 2018. Performance based design for High-rise buildings constructed. 2018. 지진공학회, Proceeding of Earthquake Engineering Society of Korea. 103-104. Inha University, Incheon, Korea. March 23.
Jeong.G.Y. 2018. Evaluate moisture content of wood based materializing different methods.2018. Abstracts of the 68th Annual Meeting of the Japan Wood Research Society. 일본목재공학회 Kyoto University, Kyoto, Japan. March 14-16.
Pang.S.J., G.Y.Jeong. Evaluation of dimensional stability for cross laminated timber using digital image. 2017. Proceeding of architectural institute of Korea annual autumn meeting. (대한건축학회) 791-791. Gyeong-ju The-K Hotel, Korea. October 25-27.
Jeong.G.Y., Pang.S.J. Development of structural design program for cross laminated timber. 2017. Proceeding of architectural institute of Korea annual autumn meeting. 682-682. (대한건축학회) Gyeong-ju The-K Hotel, Korea. October 25-27.
Pang.S.J., Moon.S.Y., G.Y.Jeong. 2017. Compressive resistance of cross Laminated timber made by domestic species. 2017. Proceeding of architectural institute of Korea annual autumn meeting.644-644. (대한건축학회) Gyeong-ju The-K Hotel, Korea. October 25-27.
Jeong.G.Y. 2017. Determination of bearing strength of wood connections. 2017. 4th International Conference on Structural Health Assessment of Timber Structures. 2017. Istanbul, Turkey. September 20-22.
Jeong.G.Y., Lee.J.H., Moon.S.J., Kong.G.U., Kim.J.Y., Kang.J.G., Lee.B.J., Jeong.H.I., Han.G.E., Lee.S.M. 2017. Multidisciplinary Approaches to Design Manual Development for High-rising Building Using Cross Laminated Timber Made from Domestic Wood Species. 2017. Proceeding of Wood Building architecture Korean society. Suwon City hall, Korea. May 26.
Moon.S.J., G.Y.Jeong. 2017. Development of program for load Carrying Capacity of wood peg Connection. 2017. Proceeding of architectural institute of Korea annual spring meeting .(대한건축학회) 945-946. Jeju Haevichi hotels&resorts, Korea. April 27-28.
Jeong.G.Y. 2017. Structural performance of traditional wood joints in Korea. 2017. Proceeding of architectural institute of Korea annual spring meeting. 643-644. (대한건축학회) Jeju Haevichi hotels&resorts, Korea. April 27-28.
Jeong.G.Y. 2017. Load carrying capacity of traditional wood joints in Korea. 2017. Proceedings of the Korean society of wood science and technology annual meeting. 24-24. Chonbuk National University, Korea. April 14-15.
Jeong.G.Y., Lee,S.S. 2017. Effects of gap size on moment carrying capacity of sagae connection. 2017. Proceedings of the Korean society of wood science and technology annual meeting. Chonbuk National University, Korea. April 14-15.
Jeong.G.Y., Lee,S.S. 2017. Moment carrying capacity of sagae connection under different moisture content. 2017. Abstracts of the 67th Annual Meeting of the Japan Wood Research Society. Kyushu University, Fukuoka, Japan. March 17-19.
Lee, S. S., G. Y. Jeong. 2016. Effect of moisture content on moment carrying capacity of sagae connection. 2016. Proceeding of architectural institute of Korea annual spring meeting. (대한건축학회)
Lee, S. S., G. Y. Jeong. 2016. Shrinkage Measurement of glulam using digital image correlation. Avstracts of the 66thAnnual Meeting of the Japan Wood Research Society. Nagoya University, Nagoya, Japan. March 27-29.
Jeong, G. Y., S. S. Lee. 2016. Evaluate the load carrying capacity of sagae joint using FEM. 2016 proceedings of the Korean society of wood science and technology annual meeting. 62-63. Kookmin University, Korea. April 15-16.
Lee, S. S., G. Y. Jeong. 2016. Predicting structural performance of utgulisanji connection according to climate change. 2016 proceedings of the Korean society of wood science and technology annual meeting. 50-51. Kookmin University, Korea. April 15-16.
Jeong, G. Y., J. H. Kong, S. S. Lee, T. Descamps. 2015. Moment carrying capacity of traditional timber joints. The 3rdproceeding of international conference on structural health assessment of timber structures. Wroclaw University of Technology, Poland. September 9-11
Lee, S. S., J. H. Kong, G. Y. Jeong. 2015. Effects of sample sizes on the swelling of different species in South Korea. International Symposium on Wood Science and Technology 2015. Japan. March 15-17.
Lee, S. S., S. Y. Cho, G. Y. Jeong. 2015. Effect of size on wood shrinkage using digital image correlation. 2015 proceeding of architectural institute of Korea annual autumn meeting, (대한건축학회) 35(2):481-482. Seoul, Korea. October 29-30.
Kong, J. H., M. J. Park, G. Y. Jeong. 2015. Effect of peg Diameters and Orientations on the Bearing Properties of Wood Peg Connection. International Symposium on Wood Science and Technology 2015. Japan. March 15-17.
Kong, J. H., S. S. Lee, S. Y. Cho, G. Y. Jeong. 2015. Compare experimental methods in the determination of wood peg connection bearing properties. 2015 proceeding of architectural institute of Korea annual autumn meeting,
(대한건축학회) 35(2):379-380. Seoul, Korea. October 29-30.
Lee, S. S., S. Y. Cho, W. T. So, G. Y. Jeong. 2015. Measurement of shrinkage of wood using digital image correlation. The 4thInternational Timber Construction Symposium. Korea. August 25-27.
Lee, S. S., S. Y. Cho, G. Y. Jeong. 2015. Measurement of dimensional changes of dovetail connections. 2015 proceeding of architectural institute of Korea annual autumn meeting, (대한건축학회) 35(2):377-378. Seoul, Korea. October 29-30.
Kong, J. H., G. Y. Jeong. 2014. Review of visual grading and allowable stress determination methodologies for larch. 68thForest Products Society International Convention. (미 임산물학회) Quebec City, Canada. August 8-15.
Kong, J. H., G. Y. Jeong. 2014. Shrinkage behaviors of different species in Korea. 68th Forest Products Society International Convention
(미 임산물학회). Quebec, Canada. August 8-15
Kong, J. H., M. J. Park, G. Y. Jeong. 2014. Evaluate bearing stress of glulam using digital image correlation. World Conference on Timber Engineering (국제목구조학회) 2014. Quebec city, Canada. August 10-14.
Jeong, G. Y., J. H. Kong. 2014 Bearing Properties of Glulam using Digital Image Correlation 64th Annual Meeting of The Japan Wood Research Society. March 13-15, 2014, Matsuyama, Japan
Kong, J. H., G. Y. Jeong. 2014. 제주산 삼나무 집성재의 Drift Pin 접합부 지압내력 평가 2014 Proceedings of the Korean society of wood science and technology annual meeting. Choongbuk National University, Korea. April 12-13
Kong, J. H., G. Y. Jeong. 2014. 국산 침엽수재의 허용응력 설정을 위한 등급구분체계 연구. 2014 Proceedings of the Korean society of wood science and technology annual meeting. Choongbuk National University, Korea. April 12-13
Kong, J. H., H. G. Lee, G. Y. Jeong. 2014. Yield estimation of lamina from domestic wood associated with log characteristics and lamina size. 2014 Proceedings of the Korean society of wood science and technology annual meeting. Choongbuk National University, Korea. April 12-13
Kong, J. H., J. O. Jeong, S. Y. Hong, G. Y. Jeong. 2013. Evaluate bearing strength of glulam for structural use. The 3rd international symposium on timber construction. Alpensia resort. Kwangwon province, Korea. October 1-2
Lee, H. G., J. H. Kong, S. Y. Hong, M. J. Park, and G. Y. Jeong. 2013. Mechanical properties of representative domestic species for structural use. The 3rd international symposium on timber construction. Alpensia resort. Kwangwon province, Korea. October 1-2
Hong, S. Y., G. Y. Jeong. 2013. Effects of log characteristics and lamina sizes on yield and grade for cross laminated timber production. The 3rd international symposium on timber construction. Alpensia resort. Kwangwon province, Korea. October 1-2
M. J. Park, K. M. Kim, S. J. Lee, J. S. Park, K. H. Hwang, J. Humbert, G. Y. Jeong, K. C. Bae, S. H. Cho. 2013. Design technology for large-scale wood building elements in Korea. The 3rd international symposium on timber construction. Alpensia resort. Kwangwon province, Korea. October 1-2
Jeong G. Y., M. J. Park, H. G. Lee, H. Y. Jeong, S. Y. Hong. 2013. 산지를 활용한 전통접합부 기계적 강도 평가. 2013 Proceedings of the Korean society of wood science and technology annual meeting. Choongnam National University, Korea. April 12-13
Hong, S. Y., G. Y. Jeong. 2013. 국산재를 활용한 교호집성재 제작시 최대의 수율을 얻기 위한 라미나 크기 분석. 2013 Proceedings of the Korean society of wood science and technology annual meeting. Choongnam National University, Korea. April 12-13
Lee, H. G., S. Y. Hong, G. Y. Jeong. 2013. 국산재의 직교 이방적인 물성측정. 2013 Proceedings of the Korean society of wood science and technology annual meeting. Choongnam National University, Korea. April 12-13
Han Y. J., Y. G. Park., J. H. Lee, G. Y. Jeong, J. P. Hong, J. J. Lee, H. M. Yeo. 2013. 낙엽송의 열기건조 후처리를 통한 함수율 균일화 및 건조응력 완화. 2013 Proceedings of the Korean society of wood science and technology annual meeting. Choongnam National University, Korea. April 12-13
Jeong, G. Y., M. J. Park, J. S. Park, K. H. Hwang. 2012. Effects of geometry on mechanical behavior of dovetail connection. 2012 Proceedings of the World Conference on Timber Engineering. Auckland, New zealand. July 16-19
Park, J. S, K. H. Hwang, G. Y. Jeong. 2012. Effect of stiffness reinforcement on insulation performance against impact sound in timber framed floor. 2012 Proceedings of the World Conference on Timber Engineering. Auckland, New zealand. July 16-19
Jeong, G. Y., M. J. Park, J. S. Park, K. H. Hwang. 2012. Predicting moment carrying capacity of sage connection using finite element method. 2012 Proceedings of the Korean society of wood science and technology annual meeting. Daegu exco, Sangaek 2dong, Buk-gu, Daegu, Korea. April 12-13
Jeong, G. Y., M. J. Park, J. S. Park, K. H. Hwang. 2012. Evaluation of design value for dovetail connection under tension using stochastic finite element method. 2012 Proceedings of the Korean society of wood science and technology annual meeting. Daegu exco, Sangaek 2 dong, Buk-gu, Daegu, Korea. April 12-13
Park, J. S., G. M. Kim, K. H. Hwang, G. Y. Jeong. 2012. 강성 및 흡음재가 목조 바닥의 충격음 차단성능에 미치는 영향. 2012 Proceedings of the Korean society of wood science and technology annual meeting. Daegu exco, Sangaek 2dong, Buk-gu, Daegu, Korea. April 12-13
Seo, J. S., S. W. Hwang, K. H. Hwang, G. Y. Jeong, H. H. Jeong. 2012. 국산합판의 휨성능과 못접합 전단내력. 2012 Proceedings of the Korean society of wood science and technology annual meeting. Daegu exco, Sangaek 2dong, Buk-gu, Daegu, Korea. April 12-13
Jeong, G. Y. 2012. 양묘 방법에 따른 로블로리 소나무의 재질 변화 및 역학적 물성의 상관관계. 2012 Forum Proceedings of the Korea Research Forum for Wood Architecture. 12(1):25-39. Seoul. March 22.
Park J. S., K. H. Hwang, G. Y. Jeong. 2011. Effect of Stiffness Reinforcement on Insulation Performance against Impact Sound in Timber Framed Floor. 2011 Proceedings of the 2nd International Symposium on the Industrialized Timber Construction. Songdo Conventia, Songdo, Korea. September 1-2
Jeong, G. Y., M. J. Park, K. H. Hwang, J. S. Park. 2011. Predicting load carrying capacity of dovetail connection using stochastic finite element method. 2011 Proceedings of the the 2nd International Symposium on the Industrialized Timber Construction. Songdo Conventia, Songdo, Korea. September 1-2
Park, M. J. K. H. Hwang, J. S. Park, J. H. Cha, G. Y. Jeong, S. J. Pang. 2011. Green technology for Large-Scale Nonresidential Wood Buildings. 2011 Proceedings of the the 2nd International Symposium on the Industrialized Timber Construction. Songdo Conventia, Songdo, Korea. September 1-2
Jeong, G. Y., D. P. Hindman. A. Zink-Sharp. 2011. Elastic properties of loblolly pine using digital image correlation. 2011 Proceedings of the Korean society of wood science and technology annual meeting. Kimdaejung Convention center, Sangmunuriro 30, Seo-gu, Gwangju, Korea. April 21-22
Jeong, G. Y., D. P. Hindman. 2011. Predicting tensile strength of loblolly pine strands using stochastic finite element method. 2011 Proceedings of the Korean society of wood science and technology annual meeting. Kimdaejung Convention center, Sangmunuriro 30, Seo-gu, Gwangju, Korea. April 21-22
Pang, S. J., G.Y. Jeong, J.S. Park, K.H. Hwang, C.Y. Park, J.J. Lee. 2011. Effects of size on mechanical properties of structural lumber of Korean pine spp. 2011 Proceedings of the Korean society of wood science and technology annual meeting. Kimdaejung Convention center, Sangmunuriro 30, Seo-gu, Gwangju, Korea. April 21-22
Jeong, G. Y. and A Zink-Sharp. 2010. Effects of thinning and fertilization on anatomical structure of loblolly pine. 2010 Forest Products Society 64th International Convention. Monona Terrace Community and Convention Center, Madison, Wisconsin, USA. June 20-22, 2010
Jeong, G. Y. and A Zink-Sharp. 2010. Correlating mechanical properties of loblolly pine strands under different forest management with wood structure. 2010 Forest Products Society 64th International Convention. Monona Terrace Community and Convention Center, Madison, Wisconsin, USA. June 20-22, 2010
Jeong, G. Y., A Zink-Sharp, and Y. Zhou. 2009. Effect of forest management on anatomical structure changes of loblolly pine (Pinus taeda). 2009 International Conference on Woody Biomass Utilization. Bost Conference Center, Mississippi State University, Starkville, Mississippi, USA. August 4-5, 2009
Jeong, G. Y., D. P. Hindman, and A Zink-Sharp. 2009. Comparison of mechanical properties of different orientation strands from loblolly pine. 2009 Forest Products Society 63rd International Convention. Doubletree Hotel Boise-Riverside, Boise, Idaho, USA. June 21-23, 2009
Jeong, G. Y. and D. P. Hindman 2008. Evaluation on mechanical behavior of loblolly pine strands using stochastic finite element method. 2008 Forest Products Society 62nd International Convention. Hyatt Regency St. Louis at Union Station, St. Louis, MO, USA. June 22-24, 2008
Jeong, G. Y. and D. P. Hindman 2008. Measurement of elastic constants of earlywood and latewood from loblolly pine using digital image correlation (DIC) technique. 2008 Forest Products Society 62nd International Convention. Hyatt Regency St. Louis at Union Station, St. Louis, MO, USA. June 22-24, 2008
Jeong, G. Y. and D. P. Hindman 2008. Tensile properties of different geometry strands from loblolly pine using digital image correlation (DIC). Spring 2008 WBC Center Advisory Board Meeting. Virginia Tech. Blacksburg, VA, USA. May 21, 2008
Jeong, G. Y. and D. P. Hindman 2007. Measurement of stiffness of earlywood and latewood from loblolly pine using a digital image correlation (DIC) technique. Annual Meeting Proceedings, Society of Wood Science and Technology 2007. 50th Anniversary Annual Convention, Knoxville, TN. USA. June 9, 2007
Hindman D. P., J. N. Lee and Jeong, G. Y. 2007. Mechanical evaluation through modeling the intra-ring properties of wood strands. Dean’s Forum on the Environment. Inn at Virginia Tech and Skelton Conference Center, Blacksburg, VA. USA. February 26, 2007
Jeong, G. Y. and D. P. Hindman 2006. Plate bending and twisting tests of southern pine and parallel strand lumber (PSL). Wood Engineering / Mechanical Properties. Forest Products Society 60th International Convention. June 25-28, 2006, Newport Beach Marriott. Newport Beach, California, USA.
실무자를 위한 벽식 고층 목조건축 구조설계서
Wall-type Multi-Stories Timber Building Structural Design for Structural Engineers
JEONG, GI YOUNG, (정기영, 2025)
고층 벽식 목조건축 구조설계, 수직하중과 수평하중에 대한 다이어프램 설계, 부재설계
고층 목조건축 다이어프램 설계
High-rise timber building diaphragm design
JEONG, GI YOUNG, (정기영, 2023)
고층 목조건축 수직부재 설계, 수평 다이어프램 설계, 벽체 다이어프램 설계,
콘크리트-목재 하이브리드 바닥 설계
전통 목조건축 유지관리 매뉴얼
Traditional timber building stability and maintenance manual
JEONG, GI YOUNG & Park, YeonJeong, (정기영, 박연정, 2021)
전통목조건축 유지관리를 위한 형태적 이해 및 용도, 시대, 지역에 따른
구조부재 특징, 힘의 흐름, 내진 저항성 분석
고층 목조건축 설계 매뉴얼
Structural design manual for high rise timber buildings
JEONG, GI YOUNG & TRAN DANG KHAI, (정기영 & 트란당카이, 2019)
국산 구조용집성판, 글루램을 활용한 고층 목조건축 설계를 위한
재료, 부재, 단열, 내화, 접합부 설계 매뉴얼
고층 목조건축 설계도서
High rise timber building design manual
JEONG, GI YOUNG & LEE, DO HYUNG, (정기영, 이도형, 2019)
고층 목조건축 설계 (무량판 구조, 기둥-보 구조, 벽식 구조)를 위한
조감도, 단면도, 입면도, 내부 투시도, 상세도면
전통접합부 설계매뉴얼
Design manual for traditional timber connections in South Korea
JEONG, GI YOUNG, (정기영, 2017)
대한민국 전통 목조건축물에 사용되는 주먹장, 엇갈이산지 이음, 사개맞춤 현대화 및
구조성능 설계 설계매뉴얼
-Patent/Program
Jeong, G. Y. 2022. 목조건축 유지관리 프로그램 프로그램 등록 C-2022-024085 (Maintenance of Stability of Timber Buildings)
Jeong, G. Y. 2021. 목조건축 바닥 다이어프램 설계 (Timber building Diaphragm Design)
Jeong, G. Y. 2021 구조용 집성판의 함수율 변화에 따른 팽창 수축 변형 거동 예측 방법 및 시스템 (METHOD AND SYSTEM FOR PREDICTING SWELLING/SHRINKAGE BEHAVIORS OF CROSS-LAMINATED TIMBER INDUCED BY MOISTURE CONTENT CHANGE)
Jeong, G. Y. 2021 목재-콘크리트 하이브리드 바닥 설계 프로그램 (Timber Concrete hybrid floor design)
Jeong, G. Y. 2021 장기하중에 따른 목조건축 거동 (Durability of timber structure design)
Jeong, G. Y. 2020고층 목조건축 단열 설계 및 외기환경에 의한 치수변화 예측 프로그램 (Insulation design and dimensional change of high-rise timber buildings) .프로그램 등록
Jeong, G. Y. 2020 고층 목조건축 구조부재 설계프로그램 (Member design for high-rise timber buildings).프로그램 등록
Jeong, G. Y. 2020고층 목조건축 접합부 설계 (Connection design for High-rise timber buildings).프로그램 등록
Jeong, G. Y. 2020. 고층 목조건축 풍하중 설계 (Wind design for high rise timber building). 프로그램 등록
Jeong, G. Y., Pang. S. J. 2019. 구조용 집성판의 함수율 변화에 따른 팽창 수축 변형 거동 예측 방법 및 시스템. 특허출원, patent
Jeong, G. Y. 2019. 구조용집성판을 활용한 고층 목조건축 바닥과 벽 부재 설계( Member design for high rise timber building). 프로그램 등록
Jeong, G. Y. 2019. 고층 목조건축 내화 설계 (Fire design for high rise timber building). 프로그램 등록
Jeong, G. Y. 2018. 고층 목조건축 내진설계 스펙트럼 (High rise timber building seismic design). 프로그램 등록
Jeong, G. Y. 2018. 국산구조용집성판 (cross laminated timber) 진동성능 정립 (Cross laminated timber vibration analyzer). 프로그램 등록
Jeong, G. Y. 2018. 짜맞춤 결구의 내력성능 예측 방법 (Load carrying capacity of traditional timber connection). 특허 제 10_1869188
Jeong, G. Y. 2018. 판이론을 활용한 국산 구조용 집성판 면 구조성능 도출 (Structural analysis of cross laminated timber using plate theory). 프로그램 등록
Jeong, G. Y. 2018. Gamma 이론을 활용한 국산 구조용 집성판 구조성능 도출 (Structural performance of cross laminated timber behavior using Gamma theory). 프로그램 등록
Jeong, G. Y. 2018. Shear Analogy 이론을 활용한 국산 구조용 집성판 내력성능 정립 (Design capacity of cross laminated timber using shear analogy). 프로그램 등록
Jeong, G. Y., S. S. Lee. 2017. 짜맞춤 결구의 내력 성능 예측 방법 . 출원
Jeong, G. Y., K. W. Kong. 2017. 전통접합부 내력성능분석 (Prediction of traditional timber connection). 프로그램 등록
Jeong, G. Y., S. S. Lee., K. W. Kong. 2017. 산지접합부 내력성능분석 (Design load carrying capacity of Wood peg connection). 프로그램 등록
Jeong, G. Y., J. J. Lee, J. H. Kong, H. G. Lee 2016. 교호집성재용 라미나 수율 예측방법 (Yield of lamina for cross laminated timber production). 특허 제 10_1602379 호. (2016.03.04)
Jeong, G. Y., K. W. Kong, W. T. Yoon, J. S. Lee. 2014. Maximize lumber yield. 프로그램 등록
GI YOUNG JEONG
Professor
EDUCATION
2005.8 - 2008.12 Ph.D. Virginia Tech, Blacksburg, VA. USA.
2004.6 - 2005.8 M.S. Louisiana State University, Baton Rouge, LA. USA.
1997.3 - 2004.2 B.S. Chonnam National University, Gwangju, Korea.
EXPERIENCE
- Employments
2021.03 - Present Professor at Chonnam National University
2017.12 - Present Director of Timber Frame Building Safety Center
2017.02 - Present Department Head of Wood Science and Engineering at CNU
2016.02 - 2021.02 Associate Professor at Chonnam National University
2012.03 - 2016.02 Assistant Professor at Chonnam National University
2011.02 - 2012.02 Post-Doctoral Associate at Korea Forest Research Institute
2009.01 - 2011.01 Post-Doctoral Associate at Sustainable Engineered Material Institute
- Academic Society Membership
2018. 1 - Present Earthquake Engineering Society of Korea
2018. 1 - Present Korea Concrete Institute
2013.12 - Present Architectural Insitutue of Korea
2011. 1 - Present Korean Wood Science Society
- Activities
2017.12 - Present Director of Timber Frame Building Safety Center
2013.01 - Present Editorial Board Member for J Korea Wood Science
2013.01 - 2016.01 Excutive Board Member for Korean Wood Science Society
Books
실무자를 위한 벽식 고층 목조건축 구조설계서
Wall-type Multi-Stories Timber Building Structural Design for Structural Engineers
JEONG, GI YOUNG
(정기영, 2025)
고층 벽식 목조건축 구조설계, 수직하중과 수평하중에 대한 다이어프램 설계, 부재설계
https://dl.nanet.go.kr/detail/MONO12026000004330
https://kbookstore.com/product/9791194716341/
고층 목조건축 다이어프램 설계
High-rise timber building diaphragm design
JEONG, GI YOUNG
(정기영, 2023)
고층 목조건축 수직부재 설계, 수평 다이어프램 설계, 벽체 다이어프램 설계,
콘크리트-목재 하이브리드 바닥 설계
http://www.cnup.co.kr/bbs/board.php?bo_table=z2_01&wr_id=990
구조용 집성판과 공학목재를 활용한 고층 건물 설계 연구를 수행하고 있습니다. 다양한 형태의 목구조 건축물에 대한 구조적 안전성 확보를 위하여, 구조 형태별 접합부 성능, 내진 성능, 부재성능, 진동, 하이브리드 구조 (구조용 집성판+콘크리트, 구조용 집성판+STEEL)에 관한 구조성능을 분석하고 있습니다.
기존 연구에서 사람이 직접 계측기를 활용하여 국부적으로 측정한 것과는 달리 카메라를 활용하여 건축물을 3차원 영상으로 재구성하여 부재 레벨에서 부터 건물 전체적인 변형도와 피해정도를 정량적으로 측정할 수 있습니다. 3차원 영상으로 구성된 영상의 질점 좌표를 구조해석 프로그램에서 그 좌표 값을 활용하여 건축물의 응력 및 변위 분포도를 분석할 수 있으며, 구조 안전성을 정량적으로 분석할 수 있습니다.
목질 재료 물성 연구를 오래동안 수행해 왔으며, 첨단장비와 기술진들의 노하우가 축적되여 목질재료의 물성을 정량적으로 분석할수 있습니다. 목질재료가 가지고 있는 불균질성과 직교 이방성에 따른 응력과 변위 분포도를 3차원으로 계측할수 있으며, 복잡한 형태의 접합부나 재료의 형태에 따른 응력 집중분석을 통한 파괴양상을 실험적으로 증명할수 있는 기술을 확보하고 있습니다.
본 연구팀은 수년간의 목구조 구조실험경험이 있으며, 신뢰할수 있는 구조성능 결과를 다수의 학술논문과 학술발표를 하였습니다. 목구조 형태에 따른 구조성능 실험과 고층 목조건축물에 필요한 요구 구조성능 분석, 재료적 물성분석, 접합부 성능값, 시스템적 분석, 내진 성능 분석등 안전한 목구조 구조 설계를 위한 기술을 확보하고 있습니다.
전통 목조건축 유지관리 매뉴얼
Traditional timber building stability and maintenance manual
JEONG, GI YOUNG & Park, YeonJeong,
(정기영, 박연정, 2021)
전통목조건축 유지관리를 위한 형태적 이해 및 용도, 시대, 지역에 따른
구조부재 특징, 힘의 흐름, 내진 저항성 분석
고층 목조건축 설계도서
High rise timber building design manual
JEONG, GI YOUNG & LEE, DO HYUNG
(정기영, 이도형, 2019)
고층 목조건축 설계 (무량판 구조, 기둥-보 구조, 벽식 구조)를 위한
조감도, 단면도, 입면도, 내부 투시도, 상세도면
고층 목조건축 설계 매뉴얼
Structural design manual for high rise timber buildings
JEONG, GI YOUNG & TRAN DANG KHAI
(정기영 & 트란당카이, 2019)
국산 구조용집성판, 글루램을 활용한 고층 목조건축 설계를 위한
재료, 부재, 단열, 내화, 접합부 설계 매뉴얼
전통접합부 설계매뉴얼
Design manual for traditional timber connections in South Korea
JEONG, GI YOUNG
(정기영, 2017)
대한민국 전통 목조건축물에 사용되는 주먹장, 엇갈이산지 이음, 사개맞춤 현대화 및
구조성능 설계 설계매뉴얼
Your Questions, Answered
Conference Presentations/Proceedings
Jeong. G. Y., Pham. V. S., Tran. D. K. (2021) Slip modulus and shear strength of notch connection in timber-concrete composite floor. 2021
콘크리트학회 가을 학술대회. 2021 November 3-5.
Jeong. G. Y., Tran. D. K. (2021) Effects of flexible and rigid diaphragm on lateral force distributions in hybrid concrete-timber buildings. 2021
콘크리트학회 가을 학술대회. 2021 November 3-5.
Jeong. G. Y., Tran. D. K. (2021) Seismic responses of three different archetypes of multi-story CLT buildings using concrete core. Autumn Annual Conference of Architectural Institute of Korea. (대한건축학회) 2021 October 28-30.
Jeong. G. Y., Pham. V. S., Tran. D. K. (2021) Shear behavior of timber-concrete composite floor. Autumn Annual Conference of Architectural Institute of Korea. (대한건축학회) 2021 October 28-30.
Jeong. G. Y. (2021) 3 차원 영상 모델을 이용한 목조건축 구조 안전성 분석. 2021 Spring Annual Conference of Architectural Institute of Korea
(대한건축학회) 2021 April 21-23.
Tran. D. K and Jeong. G. Y. 2020. Effects of core material on seismic responses of multi-story cross laminated timber (CLT) buildings. Autumn Annual Conference of Architectural Institute of Korea (대한건축학회) 2020 October 26-30.
Jeong. G. Y. 2020 Structural behaviors of traditional timber buildings in South Korea. Autumn Annual Conference of Architectural Institute of Korea (대한건축학회) 2020 October 26-30.
Pham. V. S. Jeong. G. Y. 2020 Slip modulus and shear strength of different timber-concrete hybrid floor connections. Autumn Annual Conference of Architectural Institute of Korea (대한건축학회) 2020 October 26-30.
Jeong. G. Y, Hoang. T. H., Tran. D. K. 2020. Categorization of Traditional Timber Buildings for Stability Check. Summer Annual Conference of Korea Institute for Structural Maintenance and Inspection 2020. 7.6. - 7.8.
Jeong. G. Y. 2020 Dynamic properties of traditional timber buildings SWST 63rd International Society of Wood Science and Technology 2020.7.12-7.15
Jeong.G.Y. 2019 구조용 집성판을 활용한 고층 목조건축물 내진 구조설계2019. Proceedings of the AIK meeting. 충남대학교(대전 유성구 소재), Korea. October 24-25.
Jeong.G.Y. 2019 고층 목조건축 벽식구조 내진 설계2019. Proceedings of the AIK meeting. (대한건축학회) 충남대학교(대전 유성구 소재), Korea. October 24-25.
Jeong. G. Y. 2019. High-rise timber building using Force based design. 5th Pacific Timber Engineering. Conference (PTEC 2019). Brisbane, AUSTRALIA. July 2019
Tran Dang. Khai., Nguyen. Tan No., Jeong.G.Y. 2019. 수평하중에 대한 구조용 집성판 벽 거동 예측 모델. 2019. Proceedings of the AIK meeting. 충남대학교(대전 유성구 소재),(대한건축학회) Korea. October 24-25.
Tran Dang. Khai., Nguyen. Tan No., Jeong.G.Y. 2019. Withdrawal strength of self-tapping screws on cross laminated timber. 2019. The 69th annual meeting of the Japan wood research society. Hakodate Arena, Hakodate, Japan.
Tran Dang. Khai., Jeong.G.Y. 2019. 국산 구조용 집성판에 사용된 스크류 뽑기 저항능력. 2019. Proceedings of the AIK meeting. (대한건축학회) 고려대학교 하나스퀘어 외(서울 성북구 소재), Korea. April 26-27.
Tran Dang. Khai., Nguyen. Tan No., Jeong.G.Y. 2019. 중, 고층 목조건축 내진설계시 콘크리트 혹은 구조용집성판 코어의 영향. 2019. 한국지진공학회 Workshop 및 학술발표회. 제주대학교 아라컨벤션홀, Korea. September 19-20.
Jeong.G.Y. Tran Dang. Khai. 2019. 고층 목조건축 다이어프램 설계. 2019. 한국지진공학회 Workshop 및 학술발표회. 제주대학교 아라컨벤션홀, Korea. September 19-20
Tan No Nguyen, Dang Khai Tran, and Gi Young Jeong. 2019. 드론과 건축물 수직거리에 따른 구조물 사진측량 결과 영향 조사. 2019. Proceeding of the AIK meeting. 고려대학교 하나스퀘어 외(서울 성북구 소재), Korea. April 26-27.
Tan No Nguyen, Dang Khai Tran, and Gi Young Jeong. 2019. 목조 건축물 진동 특성 평가. 2019. 한국지진공학회 Workshop 및 학술발표회. 제주대학교 아라컨벤션홀, Korea. September 19-20.
Tan No Nguyen, Dang Khai Tran, and Gi Young Jeong. 2019. 전통목조 건축물 유지관리를 위한 3차원 영상분석. 2019. Proceedings of the AIK meeting. (대한건축학회) 충남대학교(대전 유성구 소재), Korea. October 24-25.
Tan No Nguyen, Dang Khai Tran, and Gi Young Jeong. 2019. A new approach for 3D virtural model of traditional timber buildings. 2019. 5th International Conference on Structural Health Assessment of Timber Structures. Guimarães, Portugal.
Tan No Nguyen, Dang Khai Tran, and Gi Young Jeong. 2019. Applying a photogrammetry technique for the measurement of structural member in a traditional timber building. 2019. The 69th annual meeting of the Japan wood research society. Hakodate Arena, Hakodate, Japan.
Jeong.G.Y. 2018. Fighting climate change with tall timber. 2018. CTBUH(Council on Tall Buildings and Urban Habitat) 2018 conference.
국제 초고층학회 JW Marriott Marquis Hotel, Dubai. October 20-25.
Jeong.G.Y., Tran Dang. Khai., Pang.S.J. 2018. 국산 구조용 집성판 접합부 설계. 2018. Proceedings of the AIK meeting. (대한건축학회) 평창알펜시아리조트 컨벤션센터, 평창, Korea. October 25-27.
Jeong.G.Y., Tran Dang. Khai. 2018. 고층 목조건축물 내진 성능 설계. 2018. Proceedings of the AIK meeting. 평창알펜시아리조트 컨벤션센터, 평창, Korea. October 25-27.
Tran Dang. Khai., Pang.S.J, Jeong.G.Y. 2018. 반복하중에 대한 구조용집성판 전단벽 수평저항성능. 2018. Proceedings of the AIK meeting.
(대한건축학회) 평창알펜시아리조트 컨벤션센터, 평창, Korea. October 25-27.
Pang.S.J, Tran Dang. Khai., Nguyen, Tan No, Jeong.G.Y. 2018. 면외하중에 대한 국산 구조용집성판 휨·전단 저항성능 예측. 2018. Proceedings of the AIK meeting. (대한건축학회) 평창알펜시아리조트 컨벤션센터, 평창, Korea. October 25-27.
Jeong.G.Y., Pang.S.J. 2018. Effects of Species, Lamina Thickness and Combination on Moisture-Related Strain in Cross-Laminated Timber. 2018. Proceedings of the 2018 World Conference on Timber Engineering, 국제 목구조학회 Seoul, Korea. August.
Jeong.G.Y. 2018. 구조용집성판을 활용한 고층건물설계. 2018. 세미나 주제:목조건축 설계 현대화 및 사업의 활성화, Gwangju, Korea. June 1.
Jeong.G.Y. 2018. Connection design for cross laminated timber-concrete hybrid structure building. 2018. Proceedings of the Concrete engineering society meeting. 73-73. Changwon Exhibition Convention Center, Changwon, Korea. May 2-4.
Tran Dang. Khai., Pang.S.J., G.Y.Jeong. 2018. Structural design for connections in high-rise CLT buildings. 2018. Proceeding of architectural institute of Korea annual spring meeting. (대한건축학회) Seoul The-K Hotel, Korea. April 25-28.
Jeong.G.Y., Pang.S.J. 2018.Evaluate lateral resistance of different connections for high rise timber frame buildings. 2018. Proceedings of the Korean society of wood science and technology annual meeting. 9-9. Gyeongnam National University, Jinju, Korea. April 13-14.
Jeong.G.Y. 2018. Measurement of moisture content for stability of timber frame building. 2018. Proceedings of the Korean society of wood science and technology annual meeting. 66-66. Gyeongnam National University, Jinju, Korea. April 13-14.
Jeong.G.Y. 2018. Performance based design for High-rise buildings constructed. 2018. 지진공학회, Proceeding of Earthquake Engineering Society of Korea. 103-104. Inha University, Incheon, Korea. March 23.
Jeong.G.Y. 2018. Evaluate moisture content of wood based materializing different methods.2018. Abstracts of the 68th Annual Meeting of the Japan Wood Research Society. 일본목재공학회 Kyoto University, Kyoto, Japan. March 14-16.
Pang.S.J., G.Y.Jeong. Evaluation of dimensional stability for cross laminated timber using digital image. 2017. Proceeding of architectural institute of Korea annual autumn meeting. (대한건축학회) 791-791. Gyeong-ju The-K Hotel, Korea. October 25-27.
Jeong.G.Y., Pang.S.J. Development of structural design program for cross laminated timber. 2017. Proceeding of architectural institute of Korea annual autumn meeting. 682-682. (대한건축학회) Gyeong-ju The-K Hotel, Korea. October 25-27.
Pang.S.J., Moon.S.Y., G.Y.Jeong. 2017. Compressive resistance of cross Laminated timber made by domestic species. 2017. Proceeding of architectural institute of Korea annual autumn meeting.644-644. (대한건축학회) Gyeong-ju The-K Hotel, Korea. October 25-27.
Jeong.G.Y. 2017. Determination of bearing strength of wood connections. 2017. 4th International Conference on Structural Health Assessment of Timber Structures. 2017. Istanbul, Turkey. September 20-22.
Jeong.G.Y., Lee.J.H., Moon.S.J., Kong.G.U., Kim.J.Y., Kang.J.G., Lee.B.J., Jeong.H.I., Han.G.E., Lee.S.M. 2017. Multidisciplinary Approaches to Design Manual Development for High-rising Building Using Cross Laminated Timber Made from Domestic Wood Species. 2017. Proceeding of Wood Building architecture Korean society. Suwon City hall, Korea. May 26.
Moon.S.J., G.Y.Jeong. 2017. Development of program for load Carrying Capacity of wood peg Connection. 2017. Proceeding of architectural institute of Korea annual spring meeting .(대한건축학회) 945-946. Jeju Haevichi hotels&resorts, Korea. April 27-28.
Jeong.G.Y. 2017. Structural performance of traditional wood joints in Korea. 2017. Proceeding of architectural institute of Korea annual spring meeting. 643-644. (대한건축학회) Jeju Haevichi hotels&resorts, Korea. April 27-28.
Jeong.G.Y. 2017. Load carrying capacity of traditional wood joints in Korea. 2017. Proceedings of the Korean society of wood science and technology annual meeting. 24-24. Chonbuk National University, Korea. April 14-15.
Jeong.G.Y., Lee,S.S. 2017. Effects of gap size on moment carrying capacity of sagae connection. 2017. Proceedings of the Korean society of wood science and technology annual meeting. Chonbuk National University, Korea. April 14-15.
Jeong.G.Y., Lee,S.S. 2017. Moment carrying capacity of sagae connection under different moisture content. 2017. Abstracts of the 67th Annual Meeting of the Japan Wood Research Society. Kyushu University, Fukuoka, Japan. March 17-19.
Lee, S. S., G. Y. Jeong. 2016. Effect of moisture content on moment carrying capacity of sagae connection. 2016. Proceeding of architectural institute of Korea annual spring meeting. (대한건축학회)
Lee, S. S., G. Y. Jeong. 2016. Shrinkage Measurement of glulam using digital image correlation. Avstracts of the 66thAnnual Meeting of the Japan Wood Research Society. Nagoya University, Nagoya, Japan. March 27-29.
Jeong, G. Y., S. S. Lee. 2016. Evaluate the load carrying capacity of sagae joint using FEM. 2016 proceedings of the Korean society of wood science and technology annual meeting. 62-63. Kookmin University, Korea. April 15-16.
Lee, S. S., G. Y. Jeong. 2016. Predicting structural performance of utgulisanji connection according to climate change. 2016 proceedings of the Korean society of wood science and technology annual meeting. 50-51. Kookmin University, Korea. April 15-16.
Jeong, G. Y., J. H. Kong, S. S. Lee, T. Descamps. 2015. Moment carrying capacity of traditional timber joints. The 3rdproceeding of international conference on structural health assessment of timber structures. Wroclaw University of Technology, Poland. September 9-11
Lee, S. S., J. H. Kong, G. Y. Jeong. 2015. Effects of sample sizes on the swelling of different species in South Korea. International Symposium on Wood Science and Technology 2015. Japan. March 15-17.
Lee, S. S., S. Y. Cho, G. Y. Jeong. 2015. Effect of size on wood shrinkage using digital image correlation. 2015 proceeding of architectural institute of Korea annual autumn meeting, (대한건축학회) 35(2):481-482. Seoul, Korea. October 29-30.
Kong, J. H., M. J. Park, G. Y. Jeong. 2015. Effect of peg Diameters and Orientations on the Bearing Properties of Wood Peg Connection. International Symposium on Wood Science and Technology 2015. Japan. March 15-17.
Kong, J. H., S. S. Lee, S. Y. Cho, G. Y. Jeong. 2015. Compare experimental methods in the determination of wood peg connection bearing properties. 2015 proceeding of architectural institute of Korea annual autumn meeting,
(대한건축학회) 35(2):379-380. Seoul, Korea. October 29-30.
Lee, S. S., S. Y. Cho, W. T. So, G. Y. Jeong. 2015. Measurement of shrinkage of wood using digital image correlation. The 4thInternational Timber Construction Symposium. Korea. August 25-27.
Lee, S. S., S. Y. Cho, G. Y. Jeong. 2015. Measurement of dimensional changes of dovetail connections. 2015 proceeding of architectural institute of Korea annual autumn meeting, (대한건축학회) 35(2):377-378. Seoul, Korea. October 29-30.
Kong, J. H., G. Y. Jeong. 2014. Review of visual grading and allowable stress determination methodologies for larch. 68thForest Products Society International Convention. (미 임산물학회) Quebec City, Canada. August 8-15.
Kong, J. H., G. Y. Jeong. 2014. Shrinkage behaviors of different species in Korea. 68th Forest Products Society International Convention
(미 임산물학회). Quebec, Canada. August 8-15
Kong, J. H., M. J. Park, G. Y. Jeong. 2014. Evaluate bearing stress of glulam using digital image correlation. World Conference on Timber Engineering (국제목구조학회) 2014. Quebec city, Canada. August 10-14.
Jeong, G. Y., J. H. Kong. 2014 Bearing Properties of Glulam using Digital Image Correlation 64th Annual Meeting of The Japan Wood Research Society. March 13-15, 2014, Matsuyama, Japan
Kong, J. H., G. Y. Jeong. 2014. 제주산 삼나무 집성재의 Drift Pin 접합부 지압내력 평가 2014 Proceedings of the Korean society of wood science and technology annual meeting. Choongbuk National University, Korea. April 12-13
Kong, J. H., G. Y. Jeong. 2014. 국산 침엽수재의 허용응력 설정을 위한 등급구분체계 연구. 2014 Proceedings of the Korean society of wood science and technology annual meeting. Choongbuk National University, Korea. April 12-13
Kong, J. H., H. G. Lee, G. Y. Jeong. 2014. Yield estimation of lamina from domestic wood associated with log characteristics and lamina size. 2014 Proceedings of the Korean society of wood science and technology annual meeting. Choongbuk National University, Korea. April 12-13
Kong, J. H., J. O. Jeong, S. Y. Hong, G. Y. Jeong. 2013. Evaluate bearing strength of glulam for structural use. The 3rd international symposium on timber construction. Alpensia resort. Kwangwon province, Korea. October 1-2
Lee, H. G., J. H. Kong, S. Y. Hong, M. J. Park, and G. Y. Jeong. 2013. Mechanical properties of representative domestic species for structural use. The 3rd international symposium on timber construction. Alpensia resort. Kwangwon province, Korea. October 1-2
Hong, S. Y., G. Y. Jeong. 2013. Effects of log characteristics and lamina sizes on yield and grade for cross laminated timber production. The 3rd international symposium on timber construction. Alpensia resort. Kwangwon province, Korea. October 1-2
M. J. Park, K. M. Kim, S. J. Lee, J. S. Park, K. H. Hwang, J. Humbert, G. Y. Jeong, K. C. Bae, S. H. Cho. 2013. Design technology for large-scale wood building elements in Korea. The 3rd international symposium on timber construction. Alpensia resort. Kwangwon province, Korea. October 1-2
Jeong G. Y., M. J. Park, H. G. Lee, H. Y. Jeong, S. Y. Hong. 2013. 산지를 활용한 전통접합부 기계적 강도 평가. 2013 Proceedings of the Korean society of wood science and technology annual meeting. Choongnam National University, Korea. April 12-13
Hong, S. Y., G. Y. Jeong. 2013. 국산재를 활용한 교호집성재 제작시 최대의 수율을 얻기 위한 라미나 크기 분석. 2013 Proceedings of the Korean society of wood science and technology annual meeting. Choongnam National University, Korea. April 12-13
Lee, H. G., S. Y. Hong, G. Y. Jeong. 2013. 국산재의 직교 이방적인 물성측정. 2013 Proceedings of the Korean society of wood science and technology annual meeting. Choongnam National University, Korea. April 12-13
Han Y. J., Y. G. Park., J. H. Lee, G. Y. Jeong, J. P. Hong, J. J. Lee, H. M. Yeo. 2013. 낙엽송의 열기건조 후처리를 통한 함수율 균일화 및 건조응력 완화. 2013 Proceedings of the Korean society of wood science and technology annual meeting. Choongnam National University, Korea. April 12-13
Jeong, G. Y., M. J. Park, J. S. Park, K. H. Hwang. 2012. Effects of geometry on mechanical behavior of dovetail connection. 2012 Proceedings of the World Conference on Timber Engineering. Auckland, New zealand. July 16-19
Park, J. S, K. H. Hwang, G. Y. Jeong. 2012. Effect of stiffness reinforcement on insulation performance against impact sound in timber framed floor. 2012 Proceedings of the World Conference on Timber Engineering. Auckland, New zealand. July 16-19
Jeong, G. Y., M. J. Park, J. S. Park, K. H. Hwang. 2012. Predicting moment carrying capacity of sage connection using finite element method. 2012 Proceedings of the Korean society of wood science and technology annual meeting. Daegu exco, Sangaek 2dong, Buk-gu, Daegu, Korea. April 12-13
Jeong, G. Y., M. J. Park, J. S. Park, K. H. Hwang. 2012. Evaluation of design value for dovetail connection under tension using stochastic finite element method. 2012 Proceedings of the Korean society of wood science and technology annual meeting. Daegu exco, Sangaek 2 dong, Buk-gu, Daegu, Korea. April 12-13
Park, J. S., G. M. Kim, K. H. Hwang, G. Y. Jeong. 2012. 강성 및 흡음재가 목조 바닥의 충격음 차단성능에 미치는 영향. 2012 Proceedings of the Korean society of wood science and technology annual meeting. Daegu exco, Sangaek 2dong, Buk-gu, Daegu, Korea. April 12-13
Seo, J. S., S. W. Hwang, K. H. Hwang, G. Y. Jeong, H. H. Jeong. 2012. 국산합판의 휨성능과 못접합 전단내력. 2012 Proceedings of the Korean society of wood science and technology annual meeting. Daegu exco, Sangaek 2dong, Buk-gu, Daegu, Korea. April 12-13
Jeong, G. Y. 2012. 양묘 방법에 따른 로블로리 소나무의 재질 변화 및 역학적 물성의 상관관계. 2012 Forum Proceedings of the Korea Research Forum for Wood Architecture. 12(1):25-39. Seoul. March 22.
Park J. S., K. H. Hwang, G. Y. Jeong. 2011. Effect of Stiffness Reinforcement on Insulation Performance against Impact Sound in Timber Framed Floor. 2011 Proceedings of the 2nd International Symposium on the Industrialized Timber Construction. Songdo Conventia, Songdo, Korea. September 1-2
Jeong, G. Y., M. J. Park, K. H. Hwang, J. S. Park. 2011. Predicting load carrying capacity of dovetail connection using stochastic finite element method. 2011 Proceedings of the the 2nd International Symposium on the Industrialized Timber Construction. Songdo Conventia, Songdo, Korea. September 1-2
Park, M. J. K. H. Hwang, J. S. Park, J. H. Cha, G. Y. Jeong, S. J. Pang. 2011. Green technology for Large-Scale Nonresidential Wood Buildings. 2011 Proceedings of the the 2nd International Symposium on the Industrialized Timber Construction. Songdo Conventia, Songdo, Korea. September 1-2
Jeong, G. Y., D. P. Hindman. A. Zink-Sharp. 2011. Elastic properties of loblolly pine using digital image correlation. 2011 Proceedings of the Korean society of wood science and technology annual meeting. Kimdaejung Convention center, Sangmunuriro 30, Seo-gu, Gwangju, Korea. April 21-22
Jeong, G. Y., D. P. Hindman. 2011. Predicting tensile strength of loblolly pine strands using stochastic finite element method. 2011 Proceedings of the Korean society of wood science and technology annual meeting. Kimdaejung Convention center, Sangmunuriro 30, Seo-gu, Gwangju, Korea. April 21-22
Pang, S. J., G.Y. Jeong, J.S. Park, K.H. Hwang, C.Y. Park, J.J. Lee. 2011. Effects of size on mechanical properties of structural lumber of Korean pine spp. 2011 Proceedings of the Korean society of wood science and technology annual meeting. Kimdaejung Convention center, Sangmunuriro 30, Seo-gu, Gwangju, Korea. April 21-22
Jeong, G. Y. and A Zink-Sharp. 2010. Effects of thinning and fertilization on anatomical structure of loblolly pine. 2010 Forest Products Society 64th International Convention. Monona Terrace Community and Convention Center, Madison, Wisconsin, USA. June 20-22, 2010
Jeong, G. Y. and A Zink-Sharp. 2010. Correlating mechanical properties of loblolly pine strands under different forest management with wood structure. 2010 Forest Products Society 64th International Convention. Monona Terrace Community and Convention Center, Madison, Wisconsin, USA. June 20-22, 2010
Jeong, G. Y., A Zink-Sharp, and Y. Zhou. 2009. Effect of forest management on anatomical structure changes of loblolly pine (Pinus taeda). 2009 International Conference on Woody Biomass Utilization. Bost Conference Center, Mississippi State University, Starkville, Mississippi, USA. August 4-5, 2009
Jeong, G. Y., D. P. Hindman, and A Zink-Sharp. 2009. Comparison of mechanical properties of different orientation strands from loblolly pine. 2009 Forest Products Society 63rd International Convention. Doubletree Hotel Boise-Riverside, Boise, Idaho, USA. June 21-23, 2009
Jeong, G. Y. and D. P. Hindman 2008. Evaluation on mechanical behavior of loblolly pine strands using stochastic finite element method. 2008 Forest Products Society 62nd International Convention. Hyatt Regency St. Louis at Union Station, St. Louis, MO, USA. June 22-24, 2008
Jeong, G. Y. and D. P. Hindman 2008. Measurement of elastic constants of earlywood and latewood from loblolly pine using digital image correlation (DIC) technique. 2008 Forest Products Society 62nd International Convention. Hyatt Regency St. Louis at Union Station, St. Louis, MO, USA. June 22-24, 2008
Jeong, G. Y. and D. P. Hindman 2008. Tensile properties of different geometry strands from loblolly pine using digital image correlation (DIC). Spring 2008 WBC Center Advisory Board Meeting. Virginia Tech. Blacksburg, VA, USA. May 21, 2008
Jeong, G. Y. and D. P. Hindman 2007. Measurement of stiffness of earlywood and latewood from loblolly pine using a digital image correlation (DIC) technique. Annual Meeting Proceedings, Society of Wood Science and Technology 2007. 50th Anniversary Annual Convention, Knoxville, TN. USA. June 9, 2007
Hindman D. P., J. N. Lee and Jeong, G. Y. 2007. Mechanical evaluation through modeling the intra-ring properties of wood strands. Dean’s Forum on the Environment. Inn at Virginia Tech and Skelton Conference Center, Blacksburg, VA. USA. February 26, 2007
Jeong, G. Y. and D. P. Hindman 2006. Plate bending and twisting tests of southern pine and parallel strand lumber (PSL). Wood Engineering / Mechanical Properties. Forest Products Society 60th International Convention. June 25-28, 2006, Newport Beach Marriott. Newport Beach, California, USA.
Jeong, G. Y., PI, Monitoring the Stability of Timber frame building funded from NRF 2017. 6 -2022. 5 $250,000
Jeong, G. Y., PI, Development of hybrid timber-concrete composite floor funded from CNU 2020.4-2022.2 $10,000
Jeong, G. Y., PI, Development of structural system design for high rise timber buildings funded from CNU 2020.5-2021.2 $10,000
Jeong, G. Y., PI, Development of structural design for high-rise building using cross laminated timber manufactured with domestic woods funded from Korea Forest Service
2017.3 - 2019.12 $621,000Jeong, G. Y., PI, Design of wood to wood connection funded from Korea Forest Service
2014.4 - 2017.4 $225,000Jeong, G. Y., PI, Analysis of domestic wood materials using digital image correlation funded from National Research Foundation of Korea 2013.5 - 2016.5 $198,000
Jeong, G. Y., I, Timber connection design II funded from Korea Forest Research Institute
2014.4 - 2014.10 $19,600Jeong, G. Y., I, Timber connection design I funded from Korea Forest Research Institute
2013.4 - 2013.10 $19,600Jeong, G. Y., I, Cross laminated timber yield study funded from Korea Forest Service
2012.4 - 2014.3 $39,000Jeong, G. Y., PI, Study of high value added domestic wood materials funded from CNU
2012.5 - 2014.5 $30,000
Tran, D. k., Jeong G. Y. (2025) Experimental Investigation and Design Equations for Steel Strap Connections in CLT Construction. Journal of Materials in Civil Engineering. (accepted)
Jeong G.Y., Pham V. S., Tran D. K.(2025) Prediction of shear properties in cross laminated timber–concrete composites with notch connections. Structures. 76:108949
Jeong G.Y. (2024) Status of CLT building construction from 2004 to 2023. Construction and Building Materials 449, 138496
Jeong G. Y., Pham V. S., Tran D. K. (2023) Development of predicting equations for slip modulus and shear capacity of CLT–concrete composite with screw connections. Journal of Building Engineering 106468
Tran, D. K., Jeong G. Y. (2023) Tension resistance properties of hold-down and angle-bracket connections on cross laminated timber (CLT). Structures 56:104841
Tran, D. K., Jeong G. Y. (2023) Design of geometric variables of hold-down and angle bracket connections for lateral resistance enhancement of cross-laminated timber (CLT) walls considering the influence of wood species, lod-grain angles, and floor conditions. Structures 48:1003-1017
Tran, D. K, Jeong G. Y. (2022) Withdrawal capacity and strength of self-tapping screws on cross-laminated timber. Structures. 37:772-786
Tran, D. K, Jeong G. Y. (2021) Nonlinear and elasto-plastic behaviors of cross-laminated timber (CLT) walls under lateral loads. Construction and Building Materials. 295
Tran, D. K, Jeong G. Y. (2021) Effects of wood species, connection system, and wall-support interface type on cyclic behaviors of cross-laminated timber (CLT) walls under lateral loads. Construction and Building Materials. 280(9):122450
Jeong G. Y. (2021) Tensile Properties of Utgulisanji Connection. International Journal of Architectural Heritage. 15(2):313-320
Jeong, G. Y., T. N. Nguyen, D. K. Tran, T. B. H. Hoang (2020) Applying unmanned aerial vehicle photogrammetry for measuring dimension of structural elements in traditional timber building. Measurement. 153. 107386:1-13.
Pang, S. J. Jeong, G. Y. (2020) Swelling and shrinkage behavior of cross lamited timber made of different species with various lamina thickness and combinations. CONSTRUCTION AND BUILDING MATERIALS. 240:117924:1-15.
Lee. S. S., Pang. S. J., Jeong G. Y. (2019) EFFECTS OF SIZE, SPECIES, AND ADJACENT LAMINA ON MOISTURE RELATED STRAIN IN GLULAM. WOOD AND FIBER SCIENCE. 51(2):101-118.
Pang, S. J. Jeong, G. Y. (2019) Effects of combinations of lamina grade and thickness, and span-to-depth ratios on bending properties of cross-laminated timber (CLT) floor. CONSTRUCTION AND BUILDING MATERIALS. 222(20):142-151 .
Pang, S. J. Jeong, G. Y. (2019) Effects of Density, Temperature, Size, Grain Angle of Wood Materials on Nondestructive Moisture Meters. 목재공학회지 47(1):40-50.
Jeong, G. Y., J.H. Kong, S. S. Lee. (2018). Determination of moment carrying capacity of sagae connection using different methods. Engineering Structures. 159:46 - 54.
Pang, S.J., Jeong, G. Y.,. (2018). Load sharing and weakest lamina effects on the compressive resistance of cross-laminated timber under in-plane loading. Journal of Wood Science. 64(5)
Jeong, G. Y. , J. H. Kong, S. J. Lee, S. J. Pang. (2018). Comparisons of bearing properties for various oriented glulam using digital image correlation. Journal of Wood Science. 64(3):237 - 245.
Lee, S. S., Jeong, G. Y. (2018). Effects of sample size on swelling and shrinkage of Larix kaempferi and Crytomeria japonica as determined by digital caliper, image analysis, and digital image correlation (DIC). Holzforschung. 72(6):477 - 488.
Jeong, G. Y, J.H. Kong. (2018).EVALUATE BEARING PROPERTY OF WOOD PEG CONNECTION. Wood and Fiber Science. 50(1):20 - 32.
Jeong, G. Y., J. K. Song. (2017). Evaluation of structural properties of dovetail connections under tensile load using three methods of data analysis. Journal of Materials in Civil Engineering 29:10
Pang, S. J., B.J. Lee, Jeong, G. Y. (2017).Insulation saving effect for Korean Apartment House Using Cross Laminated Timber (CLT). J. Korean Wood Science and Technology. 45(6):846 - 856
Jeong, G. Y., M. J. Park. (2016). Evaluate orthotropic of wood using digital image correlation. Construction and Building Materials. 113:864-869
Jeong, G. Y. (2016). Effects of forest management on mechanical properties of oriented strand board. Forest Products Journal. 66(5/6):371-377
Lee, S. S., W. T. So, G. Y. Jeong. (2015). Review on The Measurement of Wood Shrinkage. Journal of Korean wood science and technology. 43(6):746-756
Jeong, G. Y., J. H. Kong, J. K. Song. (2015). Review of lateral resisting and moment carrying capacity studies for wood to wood connections. Journal of the Korean architectural institute of Korea, Structure & Construction. 31(5):13-24
Jeong, G. Y., J. H. Kong. (2015). Effects of span-to-depth ratio and Poisson’s ratio on elastic constants from bending and plate tests. Journal of Korean wood science and technology. 43(2):177-185
Kong, J. H., G. Y. Jeong. (2015). Review of visual grading and allowable stress determination methodologies for domestic softwood. Journal of Korean wood science and technology. 43(1):25-35
Jeong, G.Y., M. J. Park, J. S. Park, and S. J. Lee. (2013). Predicting moment carrying capacity of the “sagae” connection using the finite element method. Journal of Korean wood science and technology. 41(5):415-424.
Jeong, G. Y., J. J. Lee, H. Y. Yeo, J. P. Hong, H. K. Kim, W. T. So, and W. Y. Chung. (2013). Optimized lamina size maximizing yield for cross laminated timber using domestic trees. Journal of Korean wood science and technology. 41(2):141-148.
Kim, H. K., J. K. Oh, G. Y. Jeong, H. Y. Yeo, and J. J. Lee. (2013). Shear performance of PUR adhesive in cross laminating of red pine. Journal of Korean Wood Science and Technology. 41(2):158-163.
Amateis, R. L., H. E. Burkhart, and G. Y. Jeong. (2013). Modulus of elasticity declines with decreasing planting density for loblolly pine (Pinus taeda) plantations. Annals of Forest Science. 70:743-750
Jeong, G. Y. (2013). Relationship between anatomical and mechanical properties of loblolly pine (Pinus taeda). Forest Products Journal. 63(1/2):47-53.
Jeong, G. Y. and A. Zink-Sharp. (2013). Anatomical variability within a loblolly pine tree under thinning management. Wood and Fiber Science 45(1):119-122
Jeong, G. Y., M. J. Park, J. S. Park, K. H, Hwang. (2012). Predicting load carrying capacity of dovetail connection using the stochastic finite element method. Wood and Fiber Science 44(4):430-439
Chun, S. J. S. Y. Lee, G. Y. Jeong, J. H. Kim. (2012). Fabrication of hydrophobic self-assembled monolayers (SAM) on the surface of ultra-strength nanocellulose films. Journal of Industrial and Engineering Chemistry. 18(3):1122-1127
Jeong, G. Y. and A. Zink-Sharp. (2012). Impact of fertilization on within-tree variability in young loblolly pine (Pinus taeda). Wood and Fiber Science 44(3):334-337
Suh, J. S, S. W. Hwang, K. H. Hwang, G. Y. Jeong, H. H. Joung. (2012). Shear strength of nailed connection of domestic plywood as a substitute for OSB. Journal of the Korean Wood Science and Technology. 40(4):287-293
Pang, S. J., J. S. Park, K.H. Hwang, G.Y. Jeong, J. S. Park, M. J. Park, J. J. Lee. (2011). Bending strength of Korean softwood species for 120 × 180 mm structural members. Journal of the Korean Wood Science and Technology. 39(5):444-450
Jeong, G. Y., D. P. Hindman, and A. Zink-Sharp. (2010). Orthotropic properties of loblolly pine (Pinus taeda) strands. DOI 10.1007/s10853-010-4658-2, Journal of Materials Science 45(21):5820-5830
Jeong, G. Y., A. Zink-Sharp, and D. P. Hindman. (2010). Applying digital image correlation to wood strands: influence of loading rate and specimen thickness. Holzforschung 64(6):729-734
Jeong, G. Y. and D. P. Hindman. (2010). Modeling differently oriented loblolly pine strands incorporating variation of intraring properties using a stochastic finite element method. Wood and Fiber Science 42(1):51-61
Jeong, G. Y. and D. P. Hindman. (2009). Ultimate tensile strength of loblolly pine strands using stochastic finite element method. Journal of Materials Science 44(14):3824-3832
Jeong, G. Y., A. Zink-Sharp, and D. P. Hindman. (2009). Tensile properties of earlywood and latewood from loblolly pine (Pinus taeda) using digital image correlation. Wood and Fiber Science 41(1):51-63
Jeong, G. Y. and D. P. Hindman. (2008). Elastic constants evaluated from plate tests compared to previous bending tests. Forest Products Journal 58(9):53-58
Jeong, G. Y., D. P. Hindman, D. Finkenbinder, J. N. Lee, and Z. Lin. (2008). Effect of loading rate and thickness on the tensile properties of wood strands. Forest Products Journal 58(10):33-37
Jeong, G. Y. 2022. 목조건축 유지관리 프로그램 프로그램 등록 C-2022-024085 (Maintenance of Stability of Timber Buildings)
Jeong, G. Y. 2021. 목조건축 바닥 다이어프램 설계 (Timber building Diaphragm Design)
Jeong, G. Y. 2021 구조용 집성판의 함수율 변화에 따른 팽창 수축 변형 거동 예측 방법 및 시스템 (METHOD AND SYSTEM FOR PREDICTING SWELLING/SHRINKAGE BEHAVIORS OF CROSS-LAMINATED TIMBER INDUCED BY MOISTURE CONTENT CHANGE)
Jeong, G. Y. 2021 목재-콘크리트 하이브리드 바닥 설계 프로그램 (Timber Concrete hybrid floor design)
Jeong, G. Y. 2021 장기하중에 따른 목조건축 거동 (Durability of timber structure design)
Jeong, G. Y. 2020고층 목조건축 단열 설계 및 외기환경에 의한 치수변화 예측 프로그램 (Insulation design and dimensional change of high-rise timber buildings) .프로그램 등록
Jeong, G. Y. 2020 고층 목조건축 구조부재 설계프로그램 (Member design for high-rise timber buildings).프로그램 등록
Jeong, G. Y. 2020고층 목조건축 접합부 설계 (Connection design for High-rise timber buildings).프로그램 등록
Jeong, G. Y. 2020. 고층 목조건축 풍하중 설계 (Wind design for high rise timber building). 프로그램 등록
Jeong, G. Y., Pang. S. J. 2019. 구조용 집성판의 함수율 변화에 따른 팽창 수축 변형 거동 예측 방법 및 시스템. 특허출원, patent
Jeong, G. Y. 2019. 구조용집성판을 활용한 고층 목조건축 바닥과 벽 부재 설계( Member design for high rise timber building). 프로그램 등록
Jeong, G. Y. 2019. 고층 목조건축 내화 설계 (Fire design for high rise timber building). 프로그램 등록
Jeong, G. Y. 2018. 고층 목조건축 내진설계 스펙트럼 (High rise timber building seismic design). 프로그램 등록
Jeong, G. Y. 2018. 국산구조용집성판 (cross laminated timber) 진동성능 정립 (Cross laminated timber vibration analyzer). 프로그램 등록
Jeong, G. Y. 2018. 짜맞춤 결구의 내력성능 예측 방법 (Load carrying capacity of traditional timber connection). 특허 제 10_1869188
Jeong, G. Y. 2018. 판이론을 활용한 국산 구조용 집성판 면 구조성능 도출 (Structural analysis of cross laminated timber using plate theory). 프로그램 등록
Jeong, G. Y. 2018. Gamma 이론을 활용한 국산 구조용 집성판 구조성능 도출 (Structural performance of cross laminated timber behavior using Gamma theory). 프로그램 등록
Jeong, G. Y. 2018. Shear Analogy 이론을 활용한 국산 구조용 집성판 내력성능 정립 (Design capacity of cross laminated timber using shear analogy). 프로그램 등록
Jeong, G. Y., S. S. Lee. 2017. 짜맞춤 결구의 내력 성능 예측 방법 . 출원
Jeong, G. Y., K. W. Kong. 2017. 전통접합부 내력성능분석 (Prediction of traditional timber connection). 프로그램 등록
Jeong, G. Y., S. S. Lee., K. W. Kong. 2017. 산지접합부 내력성능분석 (Design load carrying capacity of Wood peg connection). 프로그램 등록
Jeong, G. Y., J. J. Lee, J. H. Kong, H. G. Lee 2016. 교호집성재용 라미나 수율 예측방법 (Yield of lamina for cross laminated timber production). 특허 제 10_1602379 호. (2016.03.04)
Jeong, G. Y., K. W. Kong, W. T. Yoon, J. S. Lee. 2014. Maximize lumber yield. 프로그램 등록
Let's Work Together
